Motor Control Center
Specifications
| Application | Specification |
|---|---|
| Type | Fixed,Normal starter type and intelligent modules |
| Rated Insulation Voltage | 690V AC |
| Rated Operation Volatge | 415V AC |
| Rated Frequency | 50Hz |
| Rated Current (Main Bus) | 630 - 2000A |
| Rated Current (Distribution) | 630 - 1250A |
| Rated Short Circuit | 50KA for 1sec |
| Rated Peak Current | 105KA |
| Current | upto2500 Amps |
| Construction | According to requirement. Standard offering is IP42 |
| Access | Single Front (Front) or Double Front ( Front & Rear) |
| Installation | With Space on Front as well as Rear |
| Cable Entry | Bottom or Top |
| Dimension of Section | Width – 600 / 1100 / 2100 mm / Height – 2250 mm / Depth - 450 / 600 / 800mm |
| Protection | IP 5X |
| Internal Partitioning | Form 3-B |
| Form of Separation | As per customer requirement |
| Ambient temperature | 40 degrees Celsius |
MCC Offering
- Direct on Line
- RDOL/HDOL
- Star Delta
- Variable Speed Drives
- Soft Start
- Capacitor
MCC’s are generally used for power distribution for small/medium motor loads and is usually fed from a PCC for further transmission. In our MCCdesign the physical dimensions of each compartment can be varied in width, height and depth to accommodate the various space requirements for different starter types
Benefits at a glance
- Greater Safety for operating personnel and your systems
- Highest level of plant safety because of rightly chosen switchgear make and components.
- Application Specific for any industrial Use
- Simple and Robust Modular Construction very economical for installation, operation and Maintenance
- Possibility of Extensions and Modifications
- Modular construction offers future expandability and user modification.
- Type tested ensures equipment and operator safety.
- Input materials are of highest quality standard.
- Cable/busbar connections from top/bottom.
Industry Vertical
Sugar Verticals
Head Office
Formoplastic Controls (P) Ltd.
- 3/534/1 & 30,31, Kundrathur Main Road & Amman Nagar, Madhanandhapuram, Porur, Chennai-600 116.
- fcpl@formoplastic.com
- support@formoplastic.com
- Phone: 044-49510249/50
- Mobile: +91-77080 18076
- Send Us Feedback
UNIT II
Formoplastic Controls (P) Ltd.
- Plot No G-15A,
Sidco Industrial Estate,
Kakkalur, Thiruvallur District.
Pincode 602003 - Phone: 27603066